How to Change Rear Wiper Blade Dodge Journey
Changing the rear wiper blade on a Dodge Journey is a straightforward task that can be completed in just a few simple steps. Whether your rear wiper is not clearing the windshield effectively or has stopped working altogether, replacing it is a relatively easy process that can be done at home without the need for professional assistance. Below, we will guide you through the process of how to change the rear wiper blade on a Dodge Journey.
Before you begin, gather the necessary tools and materials. You will need a new rear wiper blade, a screwdriver, and gloves to protect your hands. It is also a good idea to have a clean rag or paper towel on hand to wipe away any debris or moisture that may accumulate during the process.
Step 1: Position the Rear Wiper Arm
First, position the rear wiper arm in the down position. This can usually be done by pulling the wiper arm away from the windshield. Be careful not to force the arm or it may break.
Step 2: Remove the Wiper Blade
With the wiper arm down, locate the clip that holds the wiper blade in place. It is typically a small, plastic clip that is inserted into a slot on the arm. Use your fingers to gently pull the clip out of the slot. Once the clip is removed, the wiper blade should come off easily.
Step 3: Install the New Wiper Blade
Take the new wiper blade and position it on the wiper arm. Make sure the blade is properly aligned with the slot on the arm. Slide the clip into the slot, ensuring that it is securely in place. You may need to use a screwdriver to push the clip into the slot if it is tight.
Step 4: Test the New Wiper Blade
Once the new wiper blade is installed, raise the wiper arm back to its original position. Turn on the vehicle and test the new wiper blade to ensure that it is working properly. The wiper should move smoothly across the windshield without any hesitation or skipping.
Step 5: Clean Up
After you have confirmed that the new wiper blade is working correctly, take a moment to clean up any debris or moisture that may have accumulated during the process. Wipe down the windshield and the area around the wiper arm to ensure that your new wiper blade will perform as expected.
By following these simple steps, you can easily change the rear wiper blade on your Dodge Journey. Regular maintenance of your vehicle’s wiper blades is important for clear visibility and safe driving, so don’t hesitate to replace them when necessary.
